Spray Foam Insulation in Moore, Oklahoma

What We See in Moore’s Housing Stock

Moore’s building history is inseparable from its storm history. The tornadoes of May 3, 1999, May 20, 2013, and May 6, 2015 each carved paths through the city, and each wave of rebuilding reshaped the housing stock in distinct ways.

Before 1999, Moore’s residential construction was typical of 1970s through 1990s Oklahoma suburbs: slab-on-grade, 2x4 walls with fiberglass batts, vented attics with blown insulation, and vinyl or brick veneer exteriors. Neighborhoods like Westmoore, Southmoore, and the areas between 4th and 19th Street were filled with these homes. Many still stand. Their insulation is 25 to 40 years old, settled, and performing well below its original rating.

The 1999 tornado destroyed homes along a path from Newcastle through southwest Moore. Rebuilds in the early 2000s used the same construction methods but with marginally better materials. Spray foam was rare in Moore residential construction at that time.

The 2013 EF5 tornado changed everything. A mile-wide path from west of I-44 through the heart of Moore destroyed entire neighborhoods, including Briarwood and Plaza Towers areas. The scale of destruction forced Moore to confront its building standards. The city adopted enhanced local codes that required safe rooms or storm shelters in all new residential construction. Builders who rebuilt in the 2013-2015 period faced a city that demanded more than minimum code.

Some of those rebuilds used spray foam throughout. Others, pressed by timeline and budget during a period when every contractor in the metro was booked, defaulted to fiberglass. The result is a mixed housing stock even within the same rebuilt neighborhood — some homes with spray foam performing beautifully, others with fiberglass batts that have already begun to show their limitations.

The 2015 tornado hit areas of eastern Moore and reinforced the lesson. By this point, spray foam had become a standard recommendation from informed builders, and homeowners who rebuilt after 2015 were more likely to specify it.

Today, Moore’s housing stock is roughly three categories: pre-tornado homes (1970s through 1990s construction with deteriorating fiberglass), post-tornado rebuilds (mixed insulation quality, some spray foam, some fiberglass), and new construction on Moore’s growth edges (where spray foam is increasingly standard).

Common Spray Foam Projects in Moore

Post-tornado rebuild upgrades are a significant part of our Moore work. Homeowners who rebuilt after 2013 with fiberglass — often because it was all that was available or affordable during the reconstruction surge — are now revisiting their insulation choices. The most common upgrade is converting the vented attic to an unvented assembly with open-cell spray foam on the roof deck. This is a one-day project for most Moore homes and delivers immediate improvements in comfort and energy costs.

New construction spray foam in Moore’s growing areas — south of 19th Street, west toward Newcastle, and in newer phases of existing subdivisions — is straightforward but technically demanding. Moore’s enhanced codes mean inspectors pay attention. We apply closed-cell foam to exterior walls and open-cell to roof decks, document the application thickness with pins and measurements, and ensure the blower-door test passes with margin to spare. We work directly with Moore builders who understand that spray foam is not just insulation — it is an air barrier, a vapor retarder, and a structural enhancement in a single application.

Pre-tornado home retrofits in Moore’s older neighborhoods involve the same attic and wall work we do across the metro, but with an additional consideration: many of these homes sit in areas that have experienced tornado damage. Homeowners in these neighborhoods are acutely aware of building performance. When we explain that closed-cell foam in the wall cavities adds rack strength — making the walls stiffer and more resistant to lateral forces — it resonates in a way that is unique to Moore.

Safe room integration is not insulation work per se, but it comes up in nearly every Moore conversation. We insulate around and up to safe rooms, ensuring the conditioned envelope of the house is continuous even where the construction changes from standard framing to reinforced concrete or steel. The safe room stays functional, and the rest of the house stays comfortable.

Garage insulation is more common in Moore than in other metro communities. Post-2013 homes have reinforced garage doors rated for higher wind loads, and homeowners who use their garages as workshops or living-adjacent spaces want the thermal envelope extended. We spray closed-cell on the garage ceiling (when living space is above), walls, and the backside of the garage door with a thin lift for basic thermal break.

Why Moore Homeowners Choose Spray Foam

Moore homeowners think about building performance differently than most communities. They have lived through catastrophic storms. They have rebuilt. They have seen what survives and what does not. That experience creates a practical, no-nonsense approach to construction decisions.

Structural contribution matters here. Closed-cell spray foam at 2 inches or more bonds to framing and sheathing, creating a composite panel that resists lateral loads far better than an empty or fiberglass-filled cavity. We are not claiming spray foam is storm-proof — nothing above-grade is storm-proof against an EF5 — but it meaningfully improves the performance of the wall assembly under wind load.

Air sealing matters because Oklahoma wind is relentless. Even on calm days, pressure differentials drive infiltration through every unsealed gap. Spray foam eliminates those pathways. Moore homeowners who upgrade from fiberglass to spray foam consistently report that their homes feel “solid” — the drafts are gone, the temperature is even, and the house is quiet.

Energy resilience is a Moore-specific concern. When storms knock out power for days, a well-insulated home holds its temperature far longer than a poorly insulated one. A spray-foam-insulated house with the power out in July might climb from 72 to 85 degrees over 12 hours. A fiberglass-insulated house will hit 95 in the same period. That difference matters when you are waiting for OGE to restore service.

Our Services in Moore

Bo’s Spray Foam serves Moore with:

• Closed-cell spray foam for walls, rim joists, and areas where structural reinforcement and moisture control matter
• Open-cell spray foam for roof deck conversions and interior applications
• New construction insulation for builders meeting Moore’s enhanced local codes
• Full insulation services for pre-tornado homes and post-tornado upgrade projects
• Metal building insulation for shops and outbuildings

Moore is at the center of our service area. Call (405) 437-0146 to schedule a project assessment.

What Moore Customers Say

[Testimonial placeholder — Moore customer story about post-tornado rebuild or resilience-focused insulation project]