About Bo's Spray Foam

Bo's Spray Foam is family-owned and family-operated. Two brothers — Nicholas and Keyton Bohannan — run the day-to-day with their parents alongside them. That's the whole team.

No subcontracted crews

No rotating door of laborers who get paid by the board foot and rush the job to make their number. Every spray, every probe, every cleanup is done by a Bohannan.

That matters in spray foam more than almost any other trade, because spray foam is unforgiving. Material temperature is wrong, you get poor yield and weak adhesion. Ratio is off, you get sticky, off-gassing foam that has to be cut out and redone. Depth is short, you don't hit the R-value the customer paid for — and they'll never know unless they happen to climb into the attic with a ruler.

Our name is on it

We do this right because our name is on it. Literally. When we hand you a REScheck printout showing your attic assembly meets Oklahoma energy code, our name is on that document. When we spray intumescent coating over every square foot of interior foam per the manufacturer's ICC-ES Evaluation Report, our name is on the ESR compliance. When we check substrate temperature with an infrared thermometer before every spray, it's because a Bohannan is the one holding the gun.

Sister company

Bo's Spray Foam is the dedicated spray foam division of the family. Our sister company, Bo's Insulation, handles blown-in insulation, batt insulation, removal, and air sealing. Same family, same standard — two focused brands so each site can serve you better.

What we do

We install open cell and closed cell spray foam insulation across the Oklahoma City metro — attics, crawlspaces, metal buildings, pole barns, and new construction. We serve Oklahoma City, Edmond, Norman, Moore, Mustang, Yukon, Bethany, Midwest City, Del City, Choctaw, Piedmont, Newcastle, Tuttle, Blanchard, El Reno, and surrounding communities. For new construction and metal buildings, we travel further into rural Oklahoma.

How we work

• REScheck on every code-compliance job. We file performance path documentation and hand the printout to you and the inspector.
• ESR-compliant intumescent coatings. Every interior foam install gets the coating required by the foam product's ICC-ES Evaluation Report.
• Temperature discipline. We verify substrate temperature with an infrared thermometer before every spray. When conditions aren't right, we reschedule.
• Blower door testing available. Without a blower door test, neither you nor the contractor knows whether the air seal worked.
• Honest communication. We tell you what you need, not what costs the most. If blown-in is the right answer for your project, we'll say so and send you to our sister company.